Supermicro H8DA8 Dual Opteron 940 Serverboard
Physical Stats |
---|
Form Factor | |
---|
Dimensions | - 12" x 13.05" (30.5cm x 33.2cm)
|
---|
Processor/Chipset |
---|
CPU | - Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron? 200 Series processor(s)
- VRM x3
|
---|
Chipset | - AMD 8131 HyperTransport PCI-X Tunnel
- AMD 8111 HyperTransport I/O Hub
|
System Memory |
---|
Memory Capacity | - Eight 184-pin DIMM sockets support:
- Up to 16 GB DDR 400 MHz memory OR
- Up to 16 GB DDR 333 MHz memory OR
- Up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory support
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
---|
Memory Type | - DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
---|
DIMM Sizes | - 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
---|
Memory Voltage | |
---|
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On-Board Devices |
---|
SCSI | - Adaptec AIC-7902W Controller
- Dual-Channel Ultra320 SCSI with Host RAID (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10, JBOD
|
---|
Zero Channel RAID | - Support for Zero-Channel RAID with Adaptec 2010S SCSI ZCR Card
- (Card not included)
|
---|
IPMI | - 1U and 3U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B)
- 2U and 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-LPIPMI-LANG)
- RMM (Remote Management Module)
- (Card not included)
|
---|
Network Controllers | - Broadcom® 5704 Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
---|
VGA | - ATI Rage XL 8MB PCI Graphics Controller
|
Expansion Slots |
---|
PCI-X | - 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 66MHz PCI-X (3.3V) slots
|
---|
PCI | - 2 32-bit 33MHz PCI (5V) slots
|
---|
IPMI | |
---|
Chassis ( Optimized for H8DA8 ) |
---|
2U Chassis | - SC823S-550LP *
- SC823S-R500LP *
* Please use air-shroud CSE-PT0083 (Air-shrouds sold separately) |
---|
3U Chassis | - SC833S-R760
- SC833S-550
- SC933S1-R760
- SC933S2-R760
|
---|
Rackmount Tower / 4U | |
---|
Important Chassis Notes | - To ensure system stability, a 420W (minimum) ATX power supply
- [ 8-pin (+12V) and 24-pin are required]
|
System BIOS |
---|
BIOS Type | - 4Mb Flash EEPROM with AMI® BIOS
|
---|
BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0
- Fan Speed Control
|
---|
Input / Output |
---|
IDE | - Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
|
---|
Floppy | - 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
---|
LAN | |
---|
USB | - FUCI
- Up to 5 USB Ports 1.1 Compliant
|
---|
Keyboard / Mouse | - PS/2 keyboard and mouse ports
|
---|
Serial Ports | - 2 Fast UART 16550 serial ports
|
Management |
---|
Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
- Watch Dog
|
---|
Power Configurations | - ACPI/API Power Management
- Wake-On-LAN (WOL) header
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
PC Health Monitoring |
---|
CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, +5V Standby, HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V
- Up to 8 fan status
- Supports System Management Utility
|
---|
FAN | - Total up to 8-fan status
- 3-pin fan speed control or
- 4-pin Pulse Width Modulated (PWM) fan connector
|
---|
Temperature | - Monitoring for CPU and chassis environment
|
---|
LED | |
---|
Other Features | |
Regulatory |
---|
FCC | - Passed to meet FCC standard requirement
|
---|